| |
ASPSC invites all eligible bidders
for the supply of the following chemicals
|
No. |
Description |
Specification |
Unit |
Qty |
Remark |
|
1 |
Isomol 185 |
For steel
and high temperature castings density at 1.95 g/cm3at
200c sold content 7% EFFlux time 22-24 sec solvent
ethanol Alchol |
Ton |
5 |
|
|
2 |
Furan Resin |
NItrogin
free frurflyI alchol 80+3% free formaldehyde content max 0.1%
water content 0.5-1.0% storage life: at 200c 12
months, viscolocity at 20c:10 Mpas, density at 200c:
1:35 gm/cc-1.15gm/cc, Flash point:680c,
lessodor to be used in |
“ |
40 |
|
|
3 |
Catalyst |
For furan
resin, density at 20oc, 1..23+0.01 cm3,
viscosity at 20c , 10-15m pas,storage line un limited |
“ |
20 |
|
|
4 |
Paint for No bake mold (Iron
cover) |
For cast in
casting |
“ |
5 |
|
|
5 |
I soverm (Deslaging agent) |
Si=(0.2-70)%,
AL=(0.3-20)%, Na2=0.4% K=0.4% |
“ |
2 |
|
|
6 |
Air vest (Pattern paint)” |
Parting
release agent |
“ |
1 |
|
|
7 |
Zinc chloride |
|
“ |
0.6 |
|
|
8 |
Steel shot |
Size=2.2.8(mm) HRC=45.51 |
“ |
12 |
|
|
9 |
Degreaser okite salt LHC |
|
“ |
0.6 |
|
|
10 |
Degrease activax cleaner |
|
“ |
2 |
|
|
11 |
Milled graphite electrode |
C-99,Ash-0.2%, H-0.15%,S-0.03%, Size 4mm |
“ |
4 |
|
|
12 |
Refractory Concrit (Temcast D-94) |
|
“ |
7 |
|
|
13 |
Pure zinc |
|
“ |
80 |
|
|
14 |
Hydrochloric acid |
33% |
“ |
5 |
|
1
All bidders must submit copy of their renewed License & VAT
registration certificate & other necessary documents with offer. If
the Tender signed by local agent is must accompanied by evidence for
authority from the manufacture and or supplier.
2
Bidders should submit their offer on or before August 7, 2007
at 11:00 AM to our Branch office near Ambassador Theater. Tender must be
accompanied with 2% (Two present) bid bond by C.P.O. Bid shall be
opened on August 7, 2007 at 2:30 PM in the presence of all bidders
or their legal representatives at the branch office Near Ambassador
Theater.
3
The Tender price should be valid at least a period of two
Months.
4
Partial bids is allowed.
5
The Tender Supplies may originate from internationally
competitive manufacture.
6
Performance bond will be issued as required.
7
If there is difference in unit price and total the unit price
shall govern.
8
The S.C reserves the right to reject any or all bids.
AKAKI SPARE PARTS & HAND TOOLS S.C.
Tel. 011 434 04 22 Or 011 434 04 09
Fax. 011 434 1426 |
